FJ Cruiser Powered Rear Window Kit
Powered Rear Window Kit
This is the mod to have for your FJ Cruiser. We have gone to market to secure premium parts, and clean installation for years of trouble free use on your truck.
We use a dust and water rated sleek rod actuator that hides the wires, and guts behind the factory door panel. It is aesthetically pleasing and helps protect the vital part of the system as well as things that may be in your cargo bay like pets or gear. The actuator also has built in limits so you can't over extend the window, or the actuator itself.
All of our hardware is stainless steel and will not corrode with exposure to the elements.
Our wire harness is ready to go with add a fuse options, or direct to battery connections.
All actuators come with a 12 month warranty. This will protect you against manufacturer defects only. User error and misuse will not be covered under warranty. Shipping and all costs pertaining to shipping will not be refunded.
- What's included in our kit:
- Black wrapped actuator
- Dash/ console/ user choice mounted switch
- Easy install harness
- Custom Stainless Steel mounts
- Stainless hardware
In stock ready to ship!!
Notes: Window does latch release and open. It does not have the strength to re-latch the window, but does hold the window firmly closed. If you want it latched, press on window with palm to latch it.
(IMPORTANT NOTE: DUE TO THE NATURE OF THIS ITEM, RETURNS ARE NOT ACCEPTED ONCE OPENED OR INSTALLED)
Momentary Switch, Open, Neutral, Close
Complete Wire Harness
Optional Add a fuse for easy wire set up
Optional battery terminal run with fuse
Full Stainless Steel Hardware
Full Stainless Mounting Brackets
Complete and Detailed Instructions available for down load on this page!
| power_rear_window_installation_v2.0.pdf |
TOOLS NEEDED TO INSTALL
10MM SOCKET WRENCH
PHILIPS
5MM HEX WRENCH
DREMEL TOOL WITH SMALL BARREL SANDING DISC
A VERY STEADY HAND WHILE CUTTING AND DREMELING ON YOUR FJ CRUISER.
WIRE CUTTERS
CRIMP TOOL
ELECTRICAL TAPE
SOLDERING IRON AND SOLDER
PLYER
Ring Terminals or other Miscellaneous Connection Supplies required depending on your installation Choices.
Please NOTE: Basic understanding of automotive wiring is necessary. If you are not comfortable with the installation, have your local Stereo or Alarm installer do it for you.
